ALDI GLH 690, Руководство пользователя

Страница: 15 / 27

First use
15
sales@einhell.co.uk
After SAleS Support
GB IRE
GB
+44 151 649 1500
IRE
+44 1890 946 244
First use
Checking the hedge trimmer and product contents
NOTICE!
Risk of damage!
If you are not cautious when opening the packaging with a sharp
knife or other pointy objects, you may quickly damage the hedge
trimmer.
− Be very careful when opening the packaging.
1. Take the hedge trimmer out of the packaging.
2. Check to make sure that the delivery is complete (see fig. A and B ).
3. Check whether the hedge trimmer or the individual parts are damaged. If this is
the case, do not use the hedge trimmer. Contact the manufacturer at the service
address specified on the warranty card.
The hedge trimmer is delivered ready for use – assembly is not
required.
Preparations
1. Check the hedge: It must not be wet and remove any foreign bodies such as wires
and plant stakes.
2. Check the hedge trimmer to ensure all screw fittings are securely seated and the
double cutter on the blade
4
is sufficiently sharp.
3. Fully extend the extension cord in loops so that you can pull it towards you from
behind when working.
4. The cable strain relief
8
prevents the extension cord from being accidentally
disconnected when cutting:
Form a loop with the last 30 cm of the extension cord.
5. Guide the loop through the cable feed-through
9
and over the hook for the cable
strain relief (see fig. C ).
6. Slowly pull the loop against the cable strain relief to tighten it. If the cable is not
taut, it may become loose and slip out when working.
7. Insert the mains plug
7
in the extension cord connector.
8. Insert the mains plug of the extension cord in a properly installed socket.