Safety
10
After SAleS Support
GB IRE
GB
+44 151 649 1500
IRE
+44 1890 946 244
f)
If operating the power tool in a damp environment cannot be avoided,
use a fault-current circuit breaker.
Using a fault-current circuit breaker
reduces the risk of an electric shock.
Safety of persons
a)
Be careful, pay attention to what you are doing and approach work
with a power tool in a reasonable manner. Do not use any power tool if
you are tired or under the influence of drugs, alcohol or medication.
A single moment of inattentiveness when using the power tool can result in
serious injury.
b)
Wear personal protective equipment and always wear protective
goggles.
Depending on the type of power tool and how it is used, wearing
personal protective equipment such as a dust mask, non-slip safety shoes, a
protective helmet or ear protection reduces the risk of injury.
c)
Avoid accidentally activating the device. Make sure that the power
tool is turned off before you connect it to the power supply and/or the
rechargeable battery, pick it up or carry it.
If you have your finger on the
switch when carrying the power tool or connect the device to the power
supply when it is turned on, this may cause an accident.
d)
Remove all adjusting tools or spanners before you switch the power
tool on.
If a tool or spanner comes into contact with a rotating part of the
device, there is a risk of injury.
e)
Avoid an abnormal posture. Maintain a safe stance and keep your bal-
ance at all times.
This will allow you to have better control of the power tool
in the event of unexpected situations.
f)
Wear suitable clothing. Do not wear any loose-fitting clothing or jewel-
lery. Keep your hair, clothing and gloves away from the moving parts.
Loose clothing, jewellery or long hair may get caught in the moving parts.
g)
If you can attach dust extractors or collectors, make sure that they are
connected and used properly.
Using a dust extractor may reduce risks
associated with dust.
Using and handling the power tool
a)
Do not overload the device. Use the right power tool for your work.
The
right power tool will ensure that you work more effectively and safely within
the specified power range.
b)
Do not use a power tool if its switch is defective.
A power tool that can no
longer be switched on or off is dangerous and must be repaired.
Содержание GLH 690
Страница 3: ...3 1 3 4 5 6 7 8 9 2 A GB IRE ...
Страница 4: ...B 10 4 GB IRE ...
Страница 5: ...E D C F G 15 15 5 GB IRE ...
Страница 24: ...24 sales einhell co uk After Sales support GB IRE GB 44 151 649 1500 IRE 44 1890 946 244 ...