900W Planer
AFTER SALES SUPPORT
e-mail: [email protected]
1300 889 028
MODEL No.: PPL9001.A • 02/2021 • 704518
(toll free)
AFTER SALES SUPPORT
(toll free)
900W Planer
e-mail: [email protected]
1300 889 028
MODEL No.: PPL9001.A • 02/2021 • 704518
20
Cleaning and Storage
• Make sure you have read the safety instructions before cleaning.
• Clean the device and all of its accessories using a lint-free cloth. If
necessary, slightly moisten the cloth and use a mild soap solution where
required. Make sure that no water penetrates inside the housing.
WARNING: Never use alcohol, acetone, benzene or any other
aggressive cleaning agents, hard brushes, metal objects or
similar to clean the device.
• Dry all parts thoroughly before using the device again or store it. Always
keep the openings clean and dry.
• Store the device and its accessories inside the carry case, and in a
location that is protected from dust, moisture and direct sunlight and
that is also out of the reach of unauthorised persons.
4. Carbon Brushes
When the carbon brushes wear out, the planer will spark and/or stop.
Discontinue use as soon as this happens. They should be replaced prior to
recommencing use of the planer. Carbon brushes are a wearing component
of the planer, and are not covered under warranty. Continuing to use the
planer when carbon brushes need to be replaced may cause permanent
damage to the planer. Carbon brushes will wear out after many uses but
when the carbon brushes need to be replaced, take the planer to a service
agent for a quick and low cost replacement. Always replace both carbon
brushes at the same time.
