16
AFTER SALES SUPPORT
www.aquarius-service.com
00800-36 46 36 00
MODEL: 9163901 PRODUCT CODE: 91500 08/2014
Hotline free
AFTER SALES SUPPORT
17
00800-36 46 36 00
www.aquarius-service.com
Hotline free
MODEL: 9163901 PRODUCT CODE: 91500 08/2014
08. Troubleshooting
DANGER!
Do not attempt to repair the device yourself.
• Always remove the wall power supply from the socket
whenever a fault occurs.
Fault:
Please check the following:
No function
• Is the power supply secured?
• Batteries empty?
Cutting attachments
1
,
2
,
4
,
6
and
7
are not running
smoothly
• Attachments cleaned and
if necessary, oiled?
09. Technical Data
Model / Product Code
9163901 (91500)
Wall power supply:
Input voltage
Output voltage
Protection class
Ambient conditions
100–240 V ~ 50/60 Hz
3,6 V
800 mA
II
only approved for indoor use
Hair trimmer:
Input voltage
Rechargeable batteries
Protection class
Ambient temperature
3,6 V
800 mA
2x 1,2 V NiMH / HR6 (AA) / 800 mAh
III
+5 °C to +35 °C
Battery charger:
Input voltage
Output voltage
3,6 V
800 mA
3,6 V
800 mA
In the course of product improvements we reserve the right to make
technical and visual changes on the appliance or to its accessories.
Nose/ear hair trimmer attachment
1. Remove the nose/ear hair trimmer attachment. Rinse it with water
and let it dry completely before using it again.
Razor attachment
CAUTION!
Foil breakage
Do not remove the shaving foil from the shaving foil frame
and do not clean it with the brush.
1. Remove the razor attachment.
2. Press on the laterally fitted buttons of the razor attachment and pull
the shaving foil frame off. In doing so, grip the shaving foil frame
only at the sides and do not press on the shaving foil.
3. Clean the cutting blade with the cleaning brush included in the
delivery.
4. Use running water to clean the shaving foil in the shaving foil
frame and let it dry completely before placing it back on the razor
attachment.
5. Place the shaving foil frame back on the razor attachment.
In doing so, ensure that the fastening clip at the shaving foil
frame fits into the respective recesses of the razor attach-
ments and press the shaving foil frame slightly down until it
locks into place.
NOTE:
From time to time, place a few drops of acid-free oil (such as
sewing machine oil) onto the cutting blade. Place the razor attach-
ment on the device and let the device run for a couple of seconds
without using it. Using a soft cloth, wipe off the surplus oil, if necessary.
