ALDI Deco Style DS-FSS 500 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 31

ALDI Deco Style DS-FSS 500 Скачать руководство пользователя страница 7

General information

7

General information

Reading and storing the user manual

This user manual is part of the paint spray system. It contains important

information on safety, usage and care.
Before using the paint spray system, read the user manual carefully.

Pay particular attention to the safety instructions and warnings.

Failure to follow the instructions in this user manual may result in serious injury or

damage to the paint spray system or individual parts of it.
You must comply with applicable local or national regulations concerning the use of

this product. Keep this user manual in a safe place for future reference. If you pass

the paint spray system on to a third party, please ensure that you include this user

manual.

Explanation of symbols

The following symbols and signal words are used in this user manual, on the paint

spray system and on the packaging.

WARNING!

Indicates a hazardous situation that may result in

death or serious injury if not avoided.

CAUTION!

Designates a dangerous situation that may result

in minor or moderate injury if not avoided.

NOTICE!

Warns of possible damage to property.

This symbol provides you with useful supplementary information on

assembly or use.

Declaration of conformity (see chapter “Declaration of conformity”):

Products marked with this symbol meet all applicable Community

regulations for the European Economic Area.

This symbol identifies the paint spray system as a device of protection

class II.

«
...
5
6
7
8
9
...
»

Содержание Deco Style DS-FSS 500
































Отзывы:

Нет отзывов