Safety
8
Only use the product periodically if you cannot reduce the
release of vapour. Do not let absorbent materials (e.g. carpets,
curtains, drapes or tablecloths) get wet.
− Do not leave any water in the water tank when the product is
not in use.
− The product must be emptied and cleaned before being put
away. The product must be cleaned before the next use.
NOTICE!
Risk of damage!
Improper handling of the product can damage the product.
− Place the product on an easily accessible, level, dry, heat-re-
sistant and sufficiently stable surface. Do not place the product
on the edge of the surface.
− Avoid letting heat build up by not placing the product right
next to a wall or under a wall cupboard or similar. The steam
that is emitted could damage furniture.
− Do not cover the product during operation.
− Never place the product on or near hot surfaces (e.g. hobs).
− Ensure that the mains cord does not come into contact with
hot parts.
− Never expose the product to high temperatures (e.g. heaters)
or to the influence of weather (e.g. rain).
− Do not expose the product to direct sunlight or hot circulating air.
− Do not use the product with ambient temperatures below 0 °C.
If the water in the water tank is frozen, wait until it has melted.
− If the room temperature is below 0 °C, empty the water tank.
Freezing water can damage the product.
− Never fill the water tank with water that is above 40 °C to pre-
vent discolouration or deformation.
− Only add water to the water tank; never put water in the other
parts of the product.
