Operation
15
Refilling with water
The built-in safety mechanism automatically stops the humidification
process when there is no water in the water tank.
The Power touch key flashes red and vapour is no longer released from
the vapour discharge opening.
1. To use the product again, pull the mains plug
9
out of the socket and add water
to the water tank (see ‘Adding water’ chapter).
2. Insert the mains plug into the socket and switch on the product (see ‘Switching the
product on and off’ product).
Stopping operation
1. To switch the product off, press the Power touch key
15
(repeatedly if necessary)
until it stops illuminating (see ‘Switching the product on and off’ chapter).
2. Pull the mains plug
9
out of the socket with an earthing contact.
Filling the essential oil tray
NOTICE!
Risk of damage!
The product can be damaged if you fill the essential oil tray with water.
− Do not fill the essential oil tray with water.
Essential oil can be put in the essential oil tray. The released vapour
absorbs the essential oil through the essential oil pad and distributes
it in the ambient air. The amount of essential oil to be used depends on
the type of oil and your personal preferences. If you are not sure, add a
little less essential oil to the essential oil tray.
1. Remove the lid
1
from the water tank
2
(see
Fig. 2
).
2. Remove the essential oil pad
5
.
3. Add essential oil into the essential oil tray
4
.
4. Put the essential oil pad in the essential oil tray.
Make sure that the essential oil pad can absorb the essential oil and that the
essential oil does not spill out of the essential oil tray and leak.
5. Place the essential oil tray with the essential oil pad on top of the water tank so
that the opening is positioned on the vapour discharge channel
7
.
If you do not want to use essential oil, remove the tray and store it in a cool place.
