AFTER SALES SUPPORT
23
1300 855 831
MODEL: HCE1400 PRODUCT CODE: 58428 11/2018
AUS
HCE1400
Maintenance and cleaning/Troubleshooting
X. Maintenance and cleaning
Pull out the power plug before every maintenance operation. This also includes
connecting to the water supply or trying to eliminate leaks. There is a risk of electro-
cution or of injury from moving parts.
Cleaning
It is recommended to clean the high pressure cleaner after each use.
Never direct the water jet against the high pressure cleaner, nor clean the
high pressure cleaner under flowing water. This could give rise to the danger
of electric shock and damage the high pressure cleaner!
Always keep the high pressure cleaner clean. Do not use any detergents or sol-
vents.
• Always keep the ventilation slots clean and free from dirt and dust.
• Only clean the high pressure cleaner with a soft brush or a slightly moist cloth.
• If the vario nozzle (10) is soiled or blocked, you can remove any foreign bodies in
the nozzle using the nozzle cleaning needle (15).
Maintenance
The high pressure cleaner is maintenance free.
XI. Troubleshooting
Problem
Possible Cause
Action
The high
pressure
cleaner
does not
work.
No electrical voltage at the high pres-
sure cleaner.
Check the fuse, power cable and
power plug and have them replaced
by qualified personnel if necessary.
The cross section of the extension
cable is not large enough and/or the
extension cable is too long.
Use extension cables with larger
cross sections and/or use shorter
extension cables.
The mains voltage is lower than that
specified.
Contact the power supply company
if necessary.
The high pressure cleaner is frozen.
Check and thaw if necessary.
The motor
starts but
there is no
pressure
build-up.
Air intake in the water inlet.
Check the supply hose and hose
connectors and replace if neces-
sary.
Insufficient water supply
Turn the water supply to full flow
The
operating
pressure is
irregular.
Air intake in the water inlet.
Check the supply hose and hose
connectors and replace if neces-
sary.
