m
Warning!
Water that has passed through the non-return valve is not drinkable.
m
Warning!
If any cleaning agent comes into contact with your skin or into your eye, rinse
immediately with lots of clean water. Then consult a doctor or follow the steps
described on the safety data sheet or provided by the manufacturer of the clean-
ing agent.
Water inlet connector (Fig. 1&2)
The water inlet connector (7) has a standard hose coupling system. Plug the hose
coupling of the supply hose (min. Ø 1/2“/13 mm) to the water inlet connector (7).
Always use a reinforced hose with a standard coupling for the water inlet. The hose
should be at least 6m in length (not supplied).
A backflow preventer must be installed between the drinking water and the high
pressure cleaner! Ask your local plumber about this.
Electrical connections
• Before you connect the high pressure cleaner to the power supply make sure that
the data on the rating plate is identical to the supply voltage.
• If you use any extension cables, make sure that they are suitable for outdoor use
and have large enough wires:
1 – 10 m: 1.5 mm²
10-30 m: 2.5 mm²
• Insert the power plug on the power cable into the socket outlet.
IX. Operation
m
Warning! Be prepared for the recoil force of the emitted water jet! Ensure
that you are standing firmly and that you are holding the gun (12) securely,
otherwise you could injure yourself or other people.
Never operate the high pressure cleaner with a closed water tap. Dry run-
ning will damage the high pressure cleaner!
Using the spray gun (Fig. 4)
1 Turn on the water tap to full flow.
2 Switch on the high pressure cleaner with the On / Off switch (5). Only ever
switch on the high pressure cleaner once you have connected all of the water
pipes and confirmed they do not leak. The motor switches on until the required
pressure has built up. After the pressure has built up, the motor switches off.
AFTER SALES SUPPORT
21
1300 855 831
MODEL: HCE1400 PRODUCT CODE: 58428 11/2018
AUS
HCE1400
Before operation/Operation
