ALDI 54731 Скачать руководство пользователя страница 7

AFTER SALES SUPPORT

(toll free)

e-mail: [email protected]

1800 909 909

24v Lithium-ion Cordless Drill with Hammer Action 

MODEL: №.2024001  •  02/2017  •  55945

13

a)   Use only the charger and batteries supplied in this pack.
b)    Protect the charger and battery pack against moisture including rain and 

high humidity.

c)    Always check that the power cord is correctly connected before using the 

charger.

d)    When you are not using the charger, remove the plug from the mains 

socket. Do not pull the plug out by the power cord.

e)    Handle the battery pack carefully. Do not let it fall or be subject to impact.
f)    Always remove the plug from the power socket before you clean or 

maintain the charger or battery pack.

g)     Do not charge the battery pack if the ambient temperature is less than 

0°C or greater than 45°C.

h)   Do not short circuit the battery pack. A short circuit gives rise to a heavy 

current causing overheating and the possibility of fire or explosion.

i)  Do not connect a cable to the battery pack terminals.
j)    Make sure that no metal objects such as a nail, paper clip or coin finds its 

way into the charging socket.

k)   A damaged battery pack or one which no longer holds its charge must 

be disposed of in a special way and not placed for normal household 

rubbish collection.

l)   Never throw a battery pack into a fire or into water.
m)    Keep handles dry, clean and free from oil and grease.  Slippery handles 

do not allow for safe handling and control of the tool in unexpected 

situations.

 

 NOTE: This unit may not be used by people (including children) with 

reduced physical, sensory or mental capacities, with a lack of experience 

and without the appropriate knowledge, unless they are supervised by 

someone who is responsible for their safety or have been instructed by 

such a person with regard to how the unit is to be operated.

 

 Children should be supervised to ensure that they do not play with  

the device.

 

Wear eye protection. 

Wear ear protectors when impact drilling.  

 

Exposure to noise can cause hearing loss.

Additional safety rules for charger & batteries

10

11

Li-iON

Содержание 54731

















Отзывы: