24v Lithium-ion Cordless Drill with Hammer Action
AFTER SALES SUPPORT
e-mail: [email protected]
1800 909 909
MODEL: №. 2024001 • 02/2017 • 55945
(toll free)
AFTER SALES SUPPORT
(toll free)
e-mail: [email protected]
1800 909 909
24v Lithium-ion Cordless Drill with Hammer Action
MODEL: №.2024001 • 02/2017 • 55945
22
23
All drill/driving operations
• Mark off the centre of the hole using a centre punch or nail
(Do not use centre punch in Masonry applications).
• Don’t force the drill/driver, let it work at its own pace
• Keep the drill/driver bit sharp.
• Reduce pressure, as the drill/driver is about to break through the item
being drill/drivered.
LED work light
When the unit is switched on, the LED work light (12) also comes on to
ensure better vision and to make working in dark areas more safe.
The working light goes out when the On/Off trigger (8) is released.
CAUTION! LED is laser class 1!
Do not look directly into the laser as this may result in damage to the eyes.
Chuck replacement
The chucks of reversible drill/drivers are always fixed by a screw with a left-
hand thread. The screw, which is located in the centre of the chuck, must
be removed before the chuck can be removed. To remove the screw, turn it
in a clockwise direction. The chuck can now be removed by unscrewing it
anti-clockwise. If you have trouble removing the chuck take the drill/driver
to your nearest authorised service centre for chuck replacement.
CAUTION. Always ensure that the drill/driver is switched off and the battery
pack is removed before making any adjustments.
Side Belt Clip
The belt clip (5) is used to assist to clip the tool to your waist belt while
working.
Carry strap
A carry strap (17) is included on the drill and is already fitted for convenience.
Cleaning
Clean the case only with a damp cloth. DO NOT use solvents when cleaning
plastic parts. Plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use a clean cloth to
remove dirt, dust, oil, grease etc, then dry well.
Maintenance
To maintain capacity, recharge the battery every two months. Store only
fully charged batteries.
They should therefore be recharged from time to time. The place of storage
must be dry; the ambient temperature must not fall below 0°C or rise
above 45°C.
CAUTION! Electrical and battery operated units that no longer work
should not be disposed of in the household waste! They are to be collected
separately, in accordance with your local waste disposal regulations.
ATTENTION! Batteries must be removed from battery powered tools
and disposed of separately in accordance with relevant waste battery
regulations.
Batteries must never be disposed of with domestic waste!
Please discard power tools no longer usable at a local collection point.
Collection and disposal of packaging materials separately by types
complying with local rules and regulations. For details, please contact
your local council.
Warranty
Your new Workzone® Titanium 24V Lithium-Ion Cordless Drill will more than
satisfy your expectations.
It has been manufactured under stringent Workzone® Quality Standards to
meet superior performance criteria.
You will find your new 24V Lithium-Ion Cordless Drill easy and safe to
operate, and, with proper care, it will give you many years of dependable
service.
CAUTION. Carefully read through this entire instruction manual before
using your new Workzone® Titanium 24V Lithium-Ion Cordless Drill.
Take special care to heed the Cautions and Warnings.
Your Workzone® Titanium 24V Lithium-Ion Cordless Drill has many
features that will make your job faster and easier. Safety, performance, and
dependability have been given top priority in the development of this 24V
Lithium-Ion Cordless Drill, making it easy to maintain and operate.
Use only Workzone® Titanium replacement parts for your product.
Non-conforming parts or modifications made to parts will void your
warranty.
All drill / driving operations
Maintenance