1100W Garden Pump
AFTER SALES SUPPORT
e-mail: [email protected]
1800 909 909
MODEL: №.
XKJ-1109PE • 1/2018 • 44268
(toll free)
AFTER SALES SUPPORT
(toll free)
1100W Garden Pump
e-mail: [email protected]
1800 909 909
MODEL: №.
XKJ-1109PE • 1/2018 • 44268
28
29
2. Press the “SET” button. The display will change
where the hour digits “00” will flash and the
display will show the “MODE” button is “–” and
the set button is “+” .
To adjust the hour press “+” until your requested
hour is correct, then push the “CHECK” button
which is now on the screen indicated as “NEXT “
(Fig AN)
Now the screen will reflect “minutes” and digits
flash and the “MODE” and “SET” buttons are
again used to adjust the time. When you get
to the minutes you need to press the “CHECK”
button, which is shown on the screen as “NEXT”.
The display will show “TIME ON 12.30” (Fig AO).
3. Now you need to set the time of day you want
the unit to come on at; being the “ON TIME”.
Press the “SET” button and then use the “SET”
for “+” and “MODE” for “–” buttons and repeat
setting the on time the same as for setting the
“NOW” time.
When the “ON TIME” setting is complete press
the “CHECK” button which is shown as “NEXT”.
The display will show “Time Off 12.30” (Fig AP).
4. You now have to set the time the pump will
turn off.
Again press the “SET” button and then use the
“SET” for “+” and “MODE” for “–” buttons and
repeat setting the OFF time the same way as for
setting the NOW time.
When the off time setting is complete press the
“CHECK” button which is shown as “NEXT”. The
display will now show the pre set times you
chose for approx. 3 seconds (Fig AQ).
AN.
AP.
AO.
AQ.
AS.
AR.
5. Then the display will change to say that the pump is now in time mode
and the NOW time will be displayed (Fig AR).
6. The pump will operate in “TIMED” mode now in the pre set time. Every
day unless it is cancelled by turning the power off or the mode of the
pump is changed from time mode. If the power remains uninterrupted,
the pump will store your time continuously and operate at these times
every day.
7. If the mode of the pump is changed from time mode to any other mode,
the pump will require the times to be re-confirmed before the pump will
operate in time mode again.
If the pump has not been disconnected from the power, the pre set times
are still entered and retained in the pump. However, they need to be
confirmed if the time mode needs to be operated again.
8. To re confirm, using the “MODE” button, change the mode of the pump to
Time mode. When the screen shows “TIME NOW” and the time is shown,
if the time is correct, press the “CHECK” button as marked “Save” (Fig AS).
