Power Post
™
Monitoring System - Features
3.0 | Main Menu - Lifetime History
1
Power On Indicator
- Green LEDs illuminate inside top cover of enclosure cover,
power on indicators can be disabled in system settings
2
Alarm Beacon
- Alarm LEDs (various colors) illuminate inside the top cover of
enclosure cover
3
Pump Run Indicator
- Blue LEDs illuminate inside top cover of enclosure cover, pump
run indicators can be disabled in system settings
4
System LED Indicators
- Multiple color indicators will illuminate inside top cover of
enclosure cover for visual indication of various system events and/or alarm conditions
5
OLED Display Screen
- Displays system functions in addition to LED indicators
6
Menu Keypad
- Toggle for system functions, program settings, and view statistics
7
Test/Silence Pushbutton
- Quick access to lifetime pump run event counter statistic,
test or silence the alarm, or exit the menu system
8
Alarm Buzzer
- Annunciates to indicate an alarm event
9
Quick Snap Terminal Blocks
- Fast and easy connections for system wiring
10 Vented Post Cap
- Allows airflow, prevents build up of gases/condensation inside post
11 QR Code (not shown)
- Scan for additional product information (alderonind.com)
12 Sound Chamber
- Maximum buzzer output, protects from water intrusion
13 Cable Grips
- Pre-installed for easy installation
14 Pump Power Receptacle (not shown)
- Pre-installed, female, 15A, available in either
120VAC or 240VAC (voltage depends on model/part number)
15 Post
- Provides wire routing access for system power, pump power, float switch, and
sensor cables while protecting from water intrusion
From the LIFETIME HISTORY screen,
press right arrow key to access the menu for
event statistics and then press down arrow
key for the available events within this menu.
3.1
Pump Run Stats
3.2 Extended Pump Run Stats
3.3 High Amp Stats
3.4 Pump Float Stats
3.5 High Level Alarm Stats
3.6 Filter Alarm Stats
3.7
Pump Fail Stats
3.8 Power Loss Stats
Press right arrow key for the individual stats
of each event type listed above and data
stored in the system. The lifetime statistics
are non-resettable and are displayed in Title
Case format for visual separation from the
resettable statistics, which are displayed
in UPPERCASE format. The non-volatile
memory allows all settings and statistics to
be retained during power outages.
Note: The down arrow key will cycle through
all the lifetime history menu options until a
specific option is selected using the right
arrow key as displayed on the screen. Press
the left arrow key to exit from any screen.
Press the test/silence pushbutton to exit the
menu system.
Included with Product
Specifications
▪ (1) Power Post™; junction box and cable grips pre-installed on post
▪ (1) Pre-installed, female, 15A, pump power receptacle
(120VAC or 240VAC, voltage depends on model/part number)
▪ (2) Wago connectors
FCC Part 15:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pur-
suant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures: increase the separation between the equipment and
receiver, connect the equipment into an outlet on a circuit different from that to which the receiver is connected, consult the
dealer or an experienced radio/TV technician for help. Caution: changes / modifications not approved by Alderon Industries
could void the user’s authority to operate the equipment.
Customer Support
Online
alderonind.com
QR Code
Scan code for full product details
1 2
3
4
5
12
6
7
8
9
9
10
13
15
1
Base Model (Power Post™ Monitoring System)
3
Alarm Options (20' Alarm Float)
5
Riser Kit/Access Options (2.5
"
Riser Connection Kit)
2
Pump Voltage (120VAC Pump)
4
Pump Switch Options (15A, 20' Wide Angle)
PPMS125B2
1
2 3
4
5
Model Number Nomenclature
Alarm Power:
120VAC, 60Hz
(240VAC, 60 Hz available; consult factory)
Power Consumption:
14 Watts maximum (alarm condition)
Enclosure:
Outdoor, rated Type 3R
Certifications:
FCC Part 15 (US/Canada), CSA (US/Canada)
Pump Power Receptacle: 120VAC or 240VAC, 15A, 60Hz
Pump Power:
120VAC or 240VAC, 13A or 15A, 60Hz
(voltage/amps depends on model/part number)
