EN
Set alert level
Set beep sound when blowing
KX6000S-4 gives alert message (blinking reading, beeping sound) when the BAC
result exceeded the alert level. Alert level could be set at different levels (
0.200 /
0.300 / 0.480 / 0.500 / 0.800 / 1.000
‰
BAC) as below:
On Welcome screen, press Right button for 2 seconds. SET mode
is displayed.
Press Power button 3 times to enter SET mode for setting alert
level. Current alert level blinks.
Press Left button to select your desired alert level between (
0.200
/ 0.300 / 0.480 / 0.500 / 0.800 / 1.000
‰
BAC. Press Power button
to confirm setting.
KX6000S-4 could be configured to give beep sound / no sound when blowing as
below:
On Welcome screen, press Right button for 2 seconds. SET mode
is displayed.
Press Power button 4 times to enter SET mode for setting beep
sound when blowing.
Press Left button to select your desire setting (beep sound
enabled: b-1; beep sound disabled: b-0) Press Power button to
confirm setting.
7
