EN
Calibration
The KX6000S-4 is calibrated during manufacture using advanced alcohol simula-
tion equipment. Known alcohol concentrations are passed through the sensor
to set baseline values for testing. During testing, the unit compares users’ breath
samples to these baseline values.
The accuracy of breath alcohol testers can fluctuate after six to twelve months of
normal use, depending on the number of tests performed and operating condi-
tions.
If this product is providing inconsistent test results, is not providing any test
results, or provides unusually high or low test results, the product should be recali-
brated by a trained professional.
Please contact your local dealer for recalibration and technical support.
10
Error messages
Error message
Cause and Course of Action
REP
This message means insufficient or uneven blowing is
detected. Repeat ‘HOW TO USE’ steps 2 – 6.
REP + Snr
This message means Sensor Not Ready (Snr) and the unit
needs another warm-up / autocleansing. It occurs when
the unit has not been used for long time / occurs when
there is alcohol residue on the sensor. Another autocleans-
ing process is needed. Repeat ‘HOW TO USE’ steps 2 – 6.
H
This message displays when the unit detected a very high
alcohol concentration (above 4.00
‰
BAC).
Err
This message displays when the sensor has sustained dam-
age; please contact your local dealer for further support.
This message displays when Low Battery. Install two (2)
new AA alkaline batteries.
