EN
Step 6
Read the results:
The reading would be in range from 0.000 to
4.000
‰BAC (i.e: 0.000 to 0.400%BAC or 0.000 to 2.000 mg/l)
depending on the user pre-set BAC display format.
Note: Refer to ‘Set BAC display format’ for more about how to change the display format
for the BAC result
Step 4
Ready:
Wait until ‘RDY’ (Ready) appears with a
single “beep” indicates the unit is ready to use.
3
Blowing:
BLOW STEADILY into the mouthpiece
for 5 seconds. “BLOW 1-5...” appears on display
indicating sample being analyzed. Blow until
“beep” sound to signal completion of the test-
ing. A BAC reading will be displayed.
Note: KX6000S-4 allows user to view BAC result in 3-digit or
4-digit of display detail. Refer to ‘Set number of display digit’
Step 5
Recall the last test record
Note: It is recommended to WAIT AT LEAST 1 MINUTE between tests for more accurate result
User could recall the last test record as below:
On Welcome screen, press Right button to show the cumulative
test count (the number of tests the unit performed).
Press Right button to show the last test record.
Note: KX6000S-4 stores a maximum of 64 test records. Refer to ‘Display test result records’
for guidance for retrieving previous test records
Press Right button again to return to Welcome screen.
