37
September 14, 2018
The DSP section is where the user can manipulate the audio signal as needed. Once the audio signal is processed,
the signal is passed on to the speaker outputs, line outputs, and AES67/Dante outputs. Since the signal passes
through the DSP stage, the speaker and line outputs incorporate any DSP filters that have been configured for that
channel. It’s important to clarify that AES67/Dante audio outputs do not pass through the DSP stage, and
therefore the audio signal remains unaffected by the DSP configuration.
When the Pass-Through feature is engaged, the signal path changes to the following:
As you can see, the faders will not take effect when the RidePlayer is in this mode. The Internal Player and Faders
are effectively disconnected from the signal path. This means that all levels of adjustment must be done prior to
feeding the audio signal to the RidePlayer.
Pass-Through Mode
DSP
