26
September 14, 2018
SMPTE LTC
This connector provides access to the SMPTE Timecode (LTC) input and output.
Connector Information
Connector Type
2x3 Molex Mini-Fit Jr.
Mating Connector
Molex 0039012060
Mating Pins
Molex 39000073
Recommended Wire
18 AWG Stranded
Pinouts
GENLOCK
These are standard BNC connectors that provide access to the genlock interface of the RidePlayer. The input will
accept a Blackburst, Composite Sync, or Tri-level video sync source. The output will provide a Composite Sync
signal that can be fed into other genlock-capable devices. Two DIP switches are provided to configure sync
termination and sync input mode.
SMPTE LTC
LTC IN (-)
3
LTC IN (+)
6
GND
2
GND
5
LTC OUT (-)
1
LTC OUT (+)
4
Termination Switch
ON (UP)
75
W
Termination
OFF (DOWN)
No Termination
Sync Mode Switch
ON (UP)
Blackburst/Tri-level
OFF (DOWN)
C-Sync
Connector Layout (Wire-Side View)
