Alcorn Mcbride LightCue, Руководство пользователя

Страница: 45 / 60

Control Protocols
Latitude
Description:This command will get or set the latitude coordinates.
Get command:LA<0D>
Message Response:current value<0D>
Example:
Send Command:LA<0D>
Response:28.0<0D>
Set command:28.0LA<0D>
Message Response:R<0D>
Reboot
Description:This command will perform a hard reboot of the system.
Comments: The V16Pro will reload and run the selected script. The normal power on
response will apply
Command:XX<0D>
Message Response:K<0D> (after reboot complete)
IP address
Description:This command will get or set the selected port IP address. Port A or B
may be selected
Comments: Where xxx is a decimal number in the range of 0 – 255.
Get command:(A or B)IP<0D>
Message Response:xxx.xxx.xxx.xxx<0D>
Set command:xxx.xxx.xxx.xxx(A or B)IP<0D>
Message Response:R<0D>
Subnet Mask number
Description:This command will get or set the number used to isolate the subnet.
Comments: xxx is a decimal number in the range of 0 – 255.
Get command:SM<0D>
Message Response:xxx.xxx.xxx.xxx<0D>
Set command:xxx.xxx.xxx.xxxSM<0D>
Message Response:R<0D>
Gateway IP Address
- 37 -