Alcorn Mcbride LightCue, Руководство пользователя

Страница: 40 / 60

Chapter 2
|0|1-12,81,89|41|0|"myCueName"RR<CR>
Record with SMPTE
Description: This command is useful for when you want to command the Light Cue
Pro into record mode using a serial controller. Recording begins as soon as DMX is
detected. (ie. No arming or “change-detection” takes place.) The file is timestamped
with the values of the incoming SMPTE timecode.
Command bytes:|vvv-vvv|vvv-vvv|vvv-vvv|vvv-vvv|nnnUuRS<CR>
|vvv…vvv|– the channels to record separated by commas. ie: 1-512. (optional)
nnn – the filename, cuename or cue number to record
u – the Universe number.
Message Response:R<CR>
Examples:Record to cue file dmx00001.dmx from Universe 1:
001U1RR <CR>
Record to cue file dmx00001.dmx from channels 5-8 onUniverse 2:
|5-8|U2RR <CR>
Record channels 1-512 on universe1, no other universes:
|1-512|0|0|0|"myCueName"RR<CR>
Record channels 1-12,81 and 89 on universe2, channel 41 on universe 3 to cue
name "myCueName":
|0|1-12,81,89|41|0|"myCueName"RR<CR>
Arm Recording with SMPTE
Description: This command is useful for when you want to command the Light Cue
Pro into record mode using a serial controller. Recording begins as soon as a DMX
change is detected. The file is timestamped with the values of the incoming SMPTE
timecode.
Command bytes:|vvv-vvv|vvv-vvv|vvv-vvv|vvv-vvv|nnnUuRE<CR>
|vvv…vvv|– the channels to record separated by commas. ie: 1-512. (optional)
u – the Universe number.
Message Response:R<CR>
- 32 -