VR5 Product Manual. Rev. 1.0
9
Fig 1. Select loudspeaker 1 > Select V-series
Fig 3. Select loudspeaker 1 > Confirm VR5, be aware
of possible audio interruptions
Fig 2. Select loudspeaker 1 > Select VR5
Fig 4. Select loudspeaker 2 >
Repeat the previous three steps for your 2nd loudspeaker
5. Installation
The VR5 is to be driven by the ALC controller-amplifier for full system performance, delivering maximum sound quality with increased headroom and utmost
operation reliability and flexibility.
The operation reliability is guaranteed by the advanced limiting algorithms in the DSP; The values of the dedicated preset are based on the VR5 system
surviving a 1000 hours durability test in the R&D test bunker at Alcons Audio HQ.
On the ALC, the correct VR5 preset needs to be selected. Go to the “Preset” tab; tap the button on the channel you wish to operate the VR5 with;
A selection box will appear with the different series groups.
(See fig 1) With the encoder select the “V-series”; then select “VR5”; (See fig 2)
A confirm box will appear.
(See fig 3). Repeat these steps for your 2nd loudspeaker (See fig 4)
