VR5 Product Manual. Rev. 1.0
7
4. Connection
If you do not want to use the SIS feature at all, the sense wires should be connected to the output wires at the amplifier output in the Speakon® connector.
Warning!
Never connect the sense+ to the output- terminal or vice versa, or short circuit both sense wires! Since you are disabling the amplifier’s feedback network, the
amplifier can produce a large amount of DC at its output. Through its protection circuitry, the Sentinel will shut-off and will not pass any audio.
Loudspeaker connection without SIS™
Normal loudspeaker operation
Use bridge mode when you want to combine the power of amplifier channel
1+2 or 3+4 into one loudspeaker load.
In bridge mode connect your loudspeaker with or without SIS to the channel 1
and channel 2 outputs (or channel 3 and 4) as shown above. Sentinel 3 only!
