Rigging manual LR24 Rev. 1.21
15
5. Array configurations ___________________________________________
Storage PRRGL24 dollies
The dollies can be stored on top of each other, with or without the PRRGL24TOP plateaus.
Turn the pre-rig angle arm to the middle locking pin position and pin it. The PRRGL24 can
now be placed on top of each other. Turn all castor wheels inwards and place them inside the
C-shaped holders on the frame.
When PRRGL24TOP’s are used, place each plateau onto the dolly frame and pin it through
the rear hole of the dual hole bracket
Landing the array in fly mode
Lower the array to working height and connect a pre-rig to the bottom
cabinet with its angle arm first. Let the bottom pack compress and
demount the rear connection. Undo all cabling, and turn the angle arms
inwards and lock, if desired. Decouple the front couplers and lower the
next pack onto the pre-rig. Turn the pre-rig angle arm in the upright
position and lock it with its pin. Front cabinet couplers to the back holes of
the dual hole bracket. Let the cabinets compress into a curved pack.
