- 8 -
TROUBLE SHOOTING
Problems Actions
No Dial Tone
Check if the phone is connected to the line and
ensure the line is functional.Check if the handset
cord 3.5mm plug is inserted is into the base
properly.
Most of the operators adopt TONE dialing. Please
check if your phone is set to TONE dialing
Only can receive calls. Cannot make
outgoing calls.
Not able to get through automated
phone services. (Eg. Phone banking
Set PULSE mode only for older type of phone
lines. Please check with your operator for
required setting.
Check if the connector of telephone line is moist.
The phone rings once then is
interrupted, but dialing function works
well.
Check if too many paralleled phones are used
together. Remove or replace some of them.
Noise during conversation
Check if the wall socket of telephone line is moist
or rusty. Replace accordingly.
Check if the wall socket of telephone line is moist
or rusty. Replace accordingly
Phone does not ring for incoming calls
Check if RING OFF is selected – Select other ring
melody if the current one is soft.
Check if the batteries voltage is too low - Replace
the batteries (Please don’t mix old and new
batteries to use).Check if batteries or leaked and
the contacts are rusted. Try and clean the
contacts before inserting new batteries.
No LCD backlight or it becomes dim.
Check if the LCD contrast is set properly – Select
a proper level.
Check if the batteries voltage is too low - Replace
the batteries.
Most of the mentioned functions fails
Reset the phone – Disconnect telephone line and
remove batteries, reinstall them after 15 minutes.
Note: Due to continuous product development all features and specifications are subject to change without
prior notice.
For more Information on Warranty and Product Support please call
Alcom Electronics Pte Ltd Singapore - Head Office
Phone: (65) 68412668
Fax : (65) 68412628
Alcom Networks Sdn. Bhd. Malaysia - Branch office
Phone: (60)
3-9286 2888
Fax : (60) 3-9286 3888
Email: [email protected]
Website: www.alcomonline.com
Содержание Premium AT6206
Страница 1: ......
Страница 3: ...ON OFF HOOK NOTE This button is not available in older version...
Страница 8: ...In on hook state press HOLD RING key downwards LCD display RING 01...
