ALcom Premium AT6206, Руководство пользователя

Страница: 7 / 9

- 6 -
5. Press
DEL
key to quit.
Note: If the local area code is only 4 digits, the last digit can be left as “-”.
After local area code is set, unit will auto-filter the area code if the incoming call number with the first
several digits as same as the local area code. This function is not applicable for use in Singapore.
SETTING AND USING PABX CODE FUNCTION(Only when connected to a PABX line)
1. In on-hook state, press
SET
key and then press ▲ key twice, LCD will display
SET 3
PCODE
.
2. Press
SET
key to confirm, LCD displays
PCODE --
, the first “-“flash and indicate to set the
first digit of PABX code.
3. Press ▲ or ▼ key to set the PABX code. Press
SET
key to confirm and enter the second digit
setting.
4. Following same steps to set the second digit.
5. To use this function, when you want to call back an incoming number, just choose the desired
number from the list and press
RD
key, and the unit will dial out the number with the PABX
code. Similarly when you key a pre-dial number, just press
RD
key and the unit will dial the
number with the PABX code with or without pause depending on your setting as seen in
below note.
Note: If your PABX code is only one digit and if you need a pause, then enter code in the first digit and
leave second digit as“-“. If you don’t need a pause then leave the first digit as “-“ and enter the
code in the second digit.
SETTING DIALING TYPE
1. In on-hook state, press
SET
key and then press ▲ key fourth, LCD will display
SET 5 P-T
.
2. Press
SET
key to confirm, LCD displays
TONE
, press ▲ or ▼ key to select
T
(TONE) or
P
(PULSE).
SETTING ANTI-STEAL DIALING FUNCTION
1. In on-hook state, press
SET
key and then press ▲ key fifth, LCD displays
SET 6 ALAR
2. Press
SET
key to confirm, LCD displays
ALAR OFF
, press ▲ or ▼ key to select
ON
or
OFF
.
3. Press
SET
key to confirm.
When the anti-steal dialing is set to ON, users who want to dial using an extension via the same
line will hear a “DI-DI, DI-DI” beep continuously and will not be allowed to make a call.
SETTING LCD CONTRAST FUNCTION
1. In on-hook state, press
SET
key and then press ▲ key seventh, LCD displays
SET 7 LCD
2. Press
SET
to enter, LCD displays
LCD 3
, press ▲ or ▼ to select among 1~5 levels.
3. Press
SET
key to confirm and exit.