B
F
ASIC UNCTION
14
B
F
ASIC UNCTION
15
With the Smart Dial feature,your phone
displays the full phonenumber when
you enter the first digit(s) ofthe number
provided thatthe number is currently
stored in your phone's memory (for
example, stored in the phonebook,
received or d ialed recently).
To place a call using the smart dial
feature:
The phone searches for the
matching phone number from
memory (in the order of
outgoing calls, Phonebook,
incoming calls), then displays
the first available number.
Numbers blink except for the
part of the number you entered.
1. In Standby mode, enter the first
digit(s) ofthedesiredphone number.
Result:
Smart Dialing
2. If the number is not the one you want,
enter the remaining digits until you
see the desired number.
2. Press t he
or
button repeatedly
to choose
, then press
the OK button.
3. Press t he
or
button repeatedly
to choose
or
.
3. Press t he
button t o dial the
number displayed. O r press the C/R
button to exit this smart dial mode.
Smart Dialing
1. Press t he
button.
To enable this feature, select
.
4. Press t he OK button t o save the
selection.
You can s elect to enable or disable the
feature. To change the
setting:
The current setting is displayed.
Result
:
If the handset is too far from the
registered base, the handset cannot
properly engage the telephone line. The
icon at the top left of the LCD window
blinks to warn you and the signal
strength indication bars next to the
icon disappear.
Out of Range Indication
If you carry the h andset too farfromthe
base unit during a call, the telephone
line mightbedisconnected and the
handset returns t o Standby mode.
Check if there is n oise or static. If so,
move the handset closer to the base
station.
：
This icon blinks
when the handset
is out o f range.
The
icon iscontinuously displayed
at the top right corner of the LCD w indow.
The
icon shows the level of battery
power. The more bars you see, the more
power you have left.
When the battery is too weak for the
phone to operate, the handset will
automatically turn o ff. Place the handset
Battery Level Indicator
If you turn thisfeature on, allbuttons
except for the
button will be locked
and willnotfunction.
You can answer incoming calls or
intercom calls by using any buttons on
the phone. But when you hang up, the
phone returns to the lock mode. This
feature is useful to avoid pressing
buttons by mistake.
1. To turn the feature on, press the
Key Lock
button briefly and the
icon
appears in the LCD window.
2. To turn the feature off, press the
button briefly and the
icon
disappears from the LCD window.
Notes:
●
●
If a power failure occurs, the Key Lock
feature is automatically cancelled.
Do not hold the
button for more
than 3 seconds, or the handset will be
turned off.
：
Full
Flat
on the base to charge the handset battery.
When you have subscribed to call
w a i t i n g s e r v i c e f r o m y o u r l o c a l
company, this telephone will indicate
the number of the second caller while
you are having a conversation with the
first caller.
Caller ID On Call Waiting
When you are having a conversation
and a second call is received, press the
button to answer the secondcaller.
When you finish the call, press the
button to continue your conversation
with the first c aller.
C/R
C/R
