B
F
ASIC UNCTION
13
16
B
F
ASIC UNCTION
The
buttonisusedinconjunction
with special services such as
(Call ID type II) which m a y b e
offered by your telephone company. You
can local transfer a call to another
extension under PABX, using this feature.
C/R
Call
waiting
Registered Recall
To flash, simply press the C/R button
while the line is engaged.
Result:
The display shows .
f
To access certain services such as
voice mail or interactive telephone
system, it is necessary to use tone
dialing. Whenyour phone is settothe
pulse mode, DTMF dialing is available
.
temporarily
Tone Dialing Switchover
Press the button while the phone is in
the pulse dial mode. Your phone is
converted to the tone dialmode
temporarily.
When you press the
button o r when
you hang up the call, the mode returns to
the pulse mode.
C/R
You can page the handset from the base
unit. Using thisfeature, you ca n locate
the lost handset.
Press the
button on thebase unit.
Allhandsets registered to thebase will
ring for about 30 seconds.
Page
Paging
To stop paging, press the
button
on the base or any button on the handset.
: If a call comes in while the
handset is being paged, the handset
stops paging and the bell will ring.
Page
Note
*
Caller ID
When you receive a call, the caller's
phone number is shown on the screen, if
the caller's information is transmitted
from the network on which the c all was
made. The last 10 received calls are
stored in the Caller ID memory, and you
can use the list to make a call to any of
the numbers.
The Call ID icon
appears when there
are new calls in the memory. Once you
view the all the newcalls using t he Call
Log menu, the icon will disappear.
To review anddial any of the received
numbers:
The LCD window shows the last
caller's number (up to 2 0 digits).
The time when the call w as
received is also displayed. If
there is no caller ID received,
is displayed.
1. Press the
button.
2. Press the
button t o choose,
then press the OK button.
o r
3. Scroll the Caller ID numbers by
using the
or
buttonand choose
the desired number.
Result
:
4. To dial theselected number, press
the
button.
1. Scroll tothe number youwantto
delete from the CallerIDmemory,
then press the OK button.
2. Press the O K button toconfirm the
deletion.
1. Press the
button.
2. Press the
button repeatedly
to choose
, then
press the OK button.
3. Enter the PIN, then press the OK
button.
4. Press the O K button.
To delete a specific number from the Call
Log:
To delete all numbers in theCaller ID
memory:
The LCD window prompts you to
enter t he PIN. The PIN is preset
to "0000" at the factory.
The phone prompts y o u t o
confirm the deletion.
or
Result
Result:
:
