EN-9
EN
Display Brightness
1. Press and hold
DIMMER
for more than 3 seconds.
2. While “DIM” is displayed, press
DIMMER
repeatedly to select the desired level (DIM 1–3).
DISPLAY
Bass Boost
Press
BASS
to turn on/off boosting the bass frequency.
Muting Audio
Press
on the remote control to cut or restore the sound.
Using Preset Equalizer Curves
Press
EQ
on the unit to select among FLAT, ROCK, POP, JAZZ, CLASSICAL and CUSTOM. The display shows
your selection briefl y.
Creating a Custom Curve
1. Press
EQ
on the unit to select the CUSTOM mode.
2. While CUSTOM is displayed, press
/
to cycle among the displayed BASS and TREB range levels.
3. While BASS or TREB is displayed, adjust the volume to set the associated gain between -10 - +10.
4. Press
EQ
to exit.
SOUND FEATURES
BLUETOOTH PAIRING
Before Bluetooth pairing, you should turn on the Bluetooth function of your other device (such as, mobile phone
with Bluetooth function) and select
CD2767BE2
.
1. Press
SOURCE
repeatedly on the unit to select BT (Bluetooth) mode.
2. The "BT" blinks at slow speed and it auto searches for the last paired Bluetooth device in memory.
3. Once it enters the pairing status, the "BT" will blink at high speed.
4. Press
PAIR
on the player for 3 seconds to start pairing.
• If the Bluetooth pairing is successful, the "BT" will not blink.
• If the Bluetooth pairing is not fi xed, the "BT" will blink at slow speed. Please try pairing again.
Enjoy the music through Bluetooth
• Press
to begin or pause playback.
• Press
/
to select a specifi c track.
• Press and hold
/
to start moving backward/forward at high speed.
Switch the unit to receive another Bluetooth
device
1. Disconnect your Bluetooth device (such as mobile phone) from the player.
2. Press and hold the
PAIR
button on the player until the "BT" blinks at high speed.
3. Turn on the Bluetooth function of your other device (such as, mobile phone with Bluetooth function) and select
CD2767BE2
for Bluetooth pairing.
Note:
If your Bluetooth device (such as, mobile phone) needs the password while pairing, please enter 4-digit
number: 0000.
