EN-12
EN
Play External Sound through the Speaker System
Press
SOURCE
on the unit repeatedly to select LINE IN mode.
Note:
Suggest using Ø3.5mm LINE IN jack for MP3 player.
LINE IN
TROUBLESHOOTING TIPS
System will not turn on
• Check power cord for a secure connection.
• Unplug the unit for a moment, and then plug into
power source again.
• Check the outlet by plugging in another device.
No sound
• Increase the volume setting.
• Check connection to speakers.
• Check that you have selected the appropriate func-
tion: CD, TUNER, BT and LINE IN.
• Make sure mute is off.
• Make sure headphones are not plugged in.
Poor radio reception
• Check antenna connection.
• Move antenna.
• Turn off nearby electrical appliances, such as hair
dryer, vacuum cleaner, microwave, fluorescent
lights.
CD does not play
• Check that CD is in the tray.
• Check that CD label is facing up.
• Check that PAUSE mode is not on.
• Check that CD function is selected.
• Use CD lens cleaner.
• Clean the disc.
• Try another CD.
CD sound skips
• Clean the disc.
• Check disc for warping, scratches, or other damage.
• Check if something is causing the system to vi-
brate. If so, move the system.
• Make sure the speakers are at least 3 feet away or
on a different surface from the main unit.
CD button will not respond, or does not change
discs when you press DISC SKIP
• Switch to another function (TUNER, BT and LINE
IN) and then back to CD.
Remote control does not work
• Check that the batteries are properly installed.
• Replace weak batteries.
• Check the system is plugged into power source.
• Point the remote directly at the system’s front panel.
• Move closer to the system.
• Remove any obstacles between the remote and
the system.
