EN-5
EN
Connecting Speakers
Each speaker has a black/red wire. the red/black wires connect main speaker to main unit. Match the red wires to
the red jacks and the black wires to the black jacks on the main unit.
Release tab to lock
wire in the terminal.
2
1
Push Speaker terminal
tab down to insert wire.
Note:
Make sure the insulation is completely removed from the ends of the speaker wires at all connection points.
Red & Black
Red & Black
GETTING STARTED
Unpacking the system
You should have the following:
• one main unit (with two speakers)
• one remote control
• user manual
Connections
Back view
1. FM pigtail antenna
2. Speaker jacks
Using FM antenna
Before you use your audio system, you’ll want to make sure both the FM antenna are positioned properly. Uncoil
the FM antenna at the back of the unit, making sure it is fully extended (you may even want to tape it to the wall
behind the unit if possible, the higher the better).
Installation
To ensure sufficient ventilation, keep the
spacing shown below free from other surfaces:
Front view
Side view
4”
4”
4”
4”
2”
2
SPEAKERS
1
To an AC outlet
