alcatraz AI Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 84

alcatraz AI Скачать руководство пользователя страница 3

3

Ver. 1.01

Glossary

1FA

Single Factor Authentication allows a user to access an area with either a badge
credential or facial authentication.

1FAF

Single Factor Authentication Face-Only allows a user to access an area with facial
authentication only.

2FA

Two Factor Authentication requires a user to swipe a badge with facial authentication to
access an area.

ACS (Access
Control System)

A system that controls who has access to a space, determines who can enter or exit.

Card Format

Digital representation of the badge ID programmed onto a physical badge.

Crossing

A person enters a space when the user exits.

Enrollment

The process to bind a badge with a user to create a profile that is unique to the user for
authentication purposes. The Rock can perform auto-enrollment where it will learn over
time and associate a badge with a user. The Rock can perform manual enrollment where
the user profile is created in one shot.

Mask
Enforcement

Mask enforcement can be set in the Rock to ensure that a user must always wear a
mask when entering a space.

Un-Authorized
Entry

A user cannot be identified when entering a space.

Onboarding

Steps to associated the Rock with the Alcatraz AI Admin Portal once physical

installation is complete and confirmed to be wired correctly.

ONVIF (Open
Network Video
Interface Forum)

Forum to standardize IP-based video security products.

ONVIF Profile S

Supports basic streaming and configurations.

ONVIF Profile T

Expands on Profile S to widen features covered such as imaging configurations,
compression formats, HTTPS for secure video streaming.

Tailgating

A user is followed by another person when entering a space.

6.5.5 — Troubleshooting Tips . . . . . . . . . . . . . . . . . . . . . . . . 72

7 — New Rock Firmware

7.1 — Check Lastest Firmware Version.    .    .    .    .    .    .    .    .    .    .    .    .  74
7.2 — Update the Rock Firmware    .    .    .    .    .    .    .    .    .    .    .    .    .    .   75
7.3 — Verify Update is Successful   .    .    .    .    .    .    .    .    .    .    .    .    .    .   77

8 — Advanced Options

8.1 — Enabling or Disabling QR Code Receptive Icon . . . . . . . 80
8.2 — Setting the Rock for Corridor Mode . . . . . . . . . . . 82

Contents

«
1
2
3
4
5
...
»

Содержание AI





















































































Отзывы:

Нет отзывов