Alcatel SPEED TOUCH PRO, Руководство пользователя

Страница: 75 / 238

8 Configuration and Use - PPPtoPPTP Relaying
75 / 238
3EC 17059 ABAA TCZZA Ed. 01
Field Description
HDLC
Framing
(continued)
Value Description
Never
Always
The STPro will make sure that FF03 is
always in front of a PPP frame
encapsulated on an AAL5/ATM
connection. Although not supported by
RFC2364, some equipment may rely on
this format.
Keep The STPro will not change the PPP frame
arriving via a tunnel.
The STPro will make sure that FF03 will
never be found in front of a PPP frame
encapsulated on a AAL5/ATM
connection, independent of the actual
format of the PPP frame in the tunnel.
This setting is default, and follows
RFC2364.
Note : This configuration possibility applies only to the upstream
direction ! In the downstream direction, the STPro will always
make sure that FF03 is in front of the frame prior to put it in a
PPTP tunnel.
In order to cope with these PPP frame differences, the STPro
adapts to the different formats on a 'per connection' base.
Additionally, the
STPro offers the following PPP/AAL5 format
configuration options via the CLI if interoperability problems
should arise:
State The STPro allows multiple users to connect simultaneously via
several PPTP entries.
The
'State' column indicates the connection state of the PPTP entry.
It can take following values:
Value Description
Idle
In Use (IP) A user opened a session on this PPTP
entry.
The number in brackets is the IP address
of the PC currently using the PPPoA/PPTP
connection.
The PPTP entry is configured, and ready
for use.