manualshive.com logo in svg

Alcatel SPEED TOUCH PRO, Руководство пользователя

Поделиться
Скачать
Alcatel SPEED TOUCH PRO Скачать руководство пользователя страница 121

ATM traffic handling

ATMF25 port

11 Networking - ATM

121

 / 238

3EC 17059 ABAA TCZZA Ed. 01

11.1.3

ATM and Interfaces

ATM traffic arriving at the 

STPro

 is switched to either the Ethernet

port(s), or the (optional) ATMF25.6 port depending on

the VPI/VCI values in the individual cells.
Inside ATM VCs any protocol can be transported. However, at

both endpoints - that is where the ATM channels are terminated

-, the same protocol must be supported. If not, there will be no

endtoend connectivity.

This port, optional available on the single Ethernet port 

STPro

,

does not terminate ATM connections, it just switches ATM cells

between the DSL and ATMF25.6 port.
It is the ATMF25.6 PCNIC of the PC that actually initiates, or

terminates ATM VCs.
It is important to check in advance which protocols are supported

by the ATMF25.6 PCNIC driver. At least RFC1483 and RFC2364

should be fully implemented.
See section 11.2 for more information.

Содержание SPEED TOUCH PRO















































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды