Alcatel OmniStack 6124 Скачать руководство пользователя страница 60

Страница: 60 / 136

Using the System Configuration Program

2-48

802.1Q VLAN Port Configuration

Use this screen to configure port-specific settings for IEEE 802.1Q VLAN features.

Alcatel OmniStack 6148

< 802.1Q VLAN Port Configuration >

Unit 1 Port

1 - 12

Port

PVID

Acceptable

Ingress

GVRP

GVRP Failed

GVRP Last

Frame Type

Filtering

Status

Registrations

PDU Origin

----------------------------------------------------------------------------

All

FALSE

DISABLED

00-00-00-00-00-00

All

FALSE

DISABLED

00-00-00-00-00-00

All

FALSE

DISABLED

00-00-00-00-00-00

All

FALSE

DISABLED

00-00-00-00-00-00

All

FALSE

DISABLED

00-00-00-00-00-00

All

FALSE

DISABLED

00-00-00-00-00-00

All

FALSE

DISABLED

00-00-00-00-00-00

All

FALSE

DISABLED

00-00-00-00-00-00

All

FALSE

DISABLED

00-00-00-00-00-00

All

FALSE

DISABLED

00-00-00-00-00-00

All

FALSE

DISABLED

00-00-00-00-00-00

All

FALSE

DISABLED

00-00-00-00-00-00

Use <TAB> or arrow keys to move, other keys to make changes.

Parameter

Description

PVID

The VLAN ID assigned to untagged frames received on this port.

Acceptable Frame Type

This switch accepts “All” frame types, including VLAN tagged or VLAN

untagged frames. Note that all VLAN untagged frames received on this port

are assigned to the PVID for this port.

Ingress Filtering

If set to “True,” incoming frames for VLANs which do not include this ingress

port in their member set will be discarded at the ingress port.

GVRP Status

Enables or disables GVRP for this port. When disabled, any GVRP packets

received on this port will be discarded and no GVRP registrations will be

propagated from other ports.
Note that GVRP must be enabled for the switch before this setting can take

effect. (See Device Control Menu / Extended Bridge Configuration.)

GVRP Failed Registrations

The total number of failed GVRP registrations, for any reason, on this port.

GVRP Last PDU Origin

The Source MAC Address of the last GVRP message received on this port.

1: These controls do not affect VLAN independent BPDU frames, such as GVRP or STP. However, they do

affect VLAN dependent BPDU frames, such as GMRP.

2: Not available for the current firmware release.

Содержание OmniStack 6124









































































































































Результаты поиска

Содержание OmniStack 6124

Отзывы:

Бренды по названию

Популярные бренды

Alcatel OmniStack 6124, Руководство пользователя

Результаты поиска

Содержание OmniStack 6124

Отзывы:

Бренды по названию

Популярные бренды