Alcatel OmniStack 6124, Руководство пользователя

Страница: 48 / 136

Using the System Configuration Program
2-36
The RJ-45 ports used for one side of a trunk must all be on the same internal switch
chip. The port groups permitted include:
The 100BASE-FX fiber ports used for one side of a trunk must all be on the same
module. However, the 1000BASE-SX, 1000BASE-LX, 1000BASE-LH and
1000BASE-T ports used for one side of a trunk may be on any switch in the stack, or
both on the same switch if used standalone.
For example, when using Gigabit ports to form a trunk within a stack, the Gigabit
ports will all be at Port 25. In this case, you could specify a trunk group consisting of:
(Unit1-Port25, Unit2-Port25, Unit3-Port25, Unit4-Port25),
or two trunks consisting of:
(Unit1-Port25, Unit2-Port25) and (Unit3-Port25, Unit4-Port25).
Group 1 Group 2 Group 3
1, 2, 3, 4,
13, 14, 15, 16
5, 6, 7, 8,
17, 18, 19, 20
9, 10, 11, 12,
21, 22, 23, 24
Media Module
100BASE-FX
Any ports on a single module.
1000BASE-SX
1000BASE-LX
1000BASE-T
Up to four Gigabit ports from any switch in the stack, or both Gigabit ports on two
modules installed in a standalone switch.