background image

 

Table of Contents

 

iii

 

Introduction

 

  . . . . . . . . . . . . . . . . . . . . . . . . . .  1

Unpack the Switch  . . . . . . . . . . . . . . . . . . . .  2
Find a Secure, Well-Ventilated Location   . . . .  2
Rack-Mount the OmniAccess (Optional)  . . . .  2

 

Installing an OmniAccess

 

  . . . . . . . . . . . . .  2

Install an Uplink Submodule   . . . . . . . . . . . .  3
Connect to a Power Source   . . . . . . . . . . . . .  3
Turn the Power On  . . . . . . . . . . . . . . . . . . .  3
Verify the Management LEDs  . . . . . . . . . . . .  4
Connect External Devices . . . . . . . . . . . . . . .  4
Connect the Console Port . . . . . . . . . . . . . . .  5
Access your Terminal Emulation Software  . . .  5
Log In to the Command Line Interface (CLI)  .  5

 

Setting Up Software

 

  . . . . . . . . . . . . . . . . . . .  5

Set up a Password  . . . . . . . . . . . . . . . . . . . .  7
Set the System Time and System Date . . . . . .  8
Enter a System Description (Optional)   . . . . .  8
Assign an IP Address to the Default Group  .  11
Log Out . . . . . . . . . . . . . . . . . . . . . . . . . . .  11

 

OmniAccess Basics

 

  . . . . . . . . . . . . . . . . . . .  12

OA-512 Slot Numbering  . . . . . . . . . . . . . . .  13
OA-512 Rear Panel  . . . . . . . . . . . . . . . . . . .  14
OA-512 Management and Port LEDs  . . . . . .  15

 

The User Manual on CD

 

  . . . . . . . . . . . . . .  16

 

Table of Contents

Содержание OA-512




















Отзывы: