Setting Up Software
9
b. To specify the department or network adminis-
trator for the switch, type
system admin-contact
followed by a text-string name you want to use
at the
CLI
prompt and press
<Enter>
. For exam-
ple, to specify
Networking Corp Customer Service
(800-555-6000)
, type the following at the CLI
prompt and press
<Enter>
:
->
system admin-contact “Networking Corp
Customer Service (800-555-6000)”
♦
Important Notes
♦
To add spaces between words, you
must
include quotation marks (
“
”
)
around the text string when entering
the
admin-contact
information.
No confirmation message will appear
onscreen. To verify that the system
admin-contact information has been
set, type
system admin-contact
at the
CLI
prompt and press
<Enter>
.
c.
To view the system name, type
system name
at
the
CLI
prompt and press
<Enter>
. If no name
has been specified, the following will display:
->
system name
Unset
d. To specify a system name, type
system name
followed by a text-string name at the
CLI
prompt
and press
<Enter>
. For example, to specify
Sales
as the system name, type the following at the
CLI
prompt and press
<Enter>
:
->
system name Sales
♦
Important Notes
♦
The system name
must
be a single
word or hypenated text string. Do
not
use commas, quotation marks or
underscores.
No confirmation message will appear
onscreen. To verify that the system
name has been set, type
system name
at the
CLI
prompt and press
<Enter>
.
e. To view the system location, type
system
location
at the
CLI
prompt and press
<Enter>
. If
no location has been specified, the following
will display:
->
system location
Unset
