User Manual
8AL91432ENAAed01
58 /73
3.20.4
Access to administrator configuration (only available in IP mode)
Your administrator can access to the phone configuration. Depending on the system configuration, an
administrator password is requested to access this menu.
This menu is only available when the desk phone is running in IP mode.
In this configuration menu, use this icon to go back.
•
Use one of the following:
o
Open the user local menu: reach the 'Menu' page
Settings Phone Local Menu
Config. MMI.
o
Connect your desk phone to the network (and plug in the power jack if you are using
an external power adapter). When the desk phone displays the 'Step 2' during the boot,
repeatedly press the '*' and '#' keys in succession until a menu is displayed.
•
This section allows the administrator to set or consult:
o
IP parameters:
IP Parameters IP Status
o
DHCP option:
IP Parameters IP Config
o
Phone memory:
IP Parameters Memories
o
Used network (wired or wireless):
Network
o
Wired network configuration:
Network Wired network
o
Wireless network configuration:
Network Wireless network
o
VPN configuration:
VPN
o
Security:
Security
o
Software information (version, run mode):
Software infos
o
Hardware information (MAC, CPU):
Hardware infos
o
Software update mode:
Software infos Upgrade
▪
Enable software upgrade
: upgrade via network (system).
▪
Upgrade from USB now
: use a USB drive to upgrade the software when you
restart the desk phone.
o
Factory configuration:
Reset to Defaults
3.20.5
Auto update the desk phone via USB key
You can use a USB-A or USB-C key. The key has to be formated in FAT32 mode.
•
Create an empty text file on the USB key: upgrade.auto
Please check that the file does not have the.txt extension (especially when the file extension is
hidden in system preferences).
•
Create a directory on the USB key: upgrade
•
Copy binary files into the new directory:
o
IP mode:
▪
bin84x9P
▪
noe84x9P
o
Digital mode:
▪
bin84x9T
▪
noe84x9T
•
Insert the USB key in the corresponding USB slot (A or C).
•
Reboot the phone (the led is blinking during upgrade).