Connect to a standard DSL router
To connect the 9962 MSEC v1.0 to a standard DSL router using an Ethernet cable
through which power is not supplied, perform the following steps:
...................................................................................................................................................................................................
1
Route the Ethernet cable from the 9962 MSEC v1.0 to a standard DSL router.
...................................................................................................................................................................................................
2
Connect one end of the Ethernet cable to the 9962 MSEC v1.0.
...................................................................................................................................................................................................
3
Connect the other end of the Ethernet cable to the router.
...................................................................................................................................................................................................
4
Finally, secure the Ethernet cable to the wall.
Connect the AC-DC power adapter
If you intend to use an AC-DC power adapter to supply power to the 9962 MSEC v1.0,
perform the following steps:
...................................................................................................................................................................................................
1
Route the power supply cable from the 9962 MSEC v1.0 to the supplied AC-DC power
adapter.
...................................................................................................................................................................................................
2
Connect the power supply cable to the 9962 MSEC v1.0.
...................................................................................................................................................................................................
3
Finally, secure the power supply cable to the wall.
Connect to a DSL router with PoE function
To connect the 9962 MSEC v1.0 to a DSL router with PoE function, perform the
following steps:
...................................................................................................................................................................................................
1
Route the Ethernet cable from the 9962 MSEC v1.0 to a DSL router with PoE function.
Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1
installation
Cabling
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
2-26
Alcatel-Lucent 9962 MSEC v1.0
3MN-02001-0002-RJZZA
Issue 2.01
September 2015
P
RELIMINARY
P
RELIMINARY
E
N D
O F
S T E P S
...................................................................................................................................................................................................
E
N D
O F
S T E P S
...................................................................................................................................................................................................
