Basic safety aspects
General safety requirements
In order to keep the technically unavoidable residual risk to a minimum, it is imperative
to observe the following rules:
•
DO NOT CONNECT CABLES TO WORKING/LIVE EQUIPMENT. This
activity should only be performed by the services/delivery team during
integration.
•
Transport, storage, installation, and operation of the system must be under specified
permissible conditions only. See accompanying documentation and information on the
system.
•
Installation, configuration, and disassembly must be carried out only by suitably
qualified personnel and with reference to the respective documentation. Due to the
complexity of the system, personnel require special training.
•
Identify potential hazards prior to starting the installation.
•
The system must be operated by trained and authorized users only. The user must only
operate the system after having read and understood the chapter on safety and the
parts of the documentation relevant to operation. For complex systems, additional
training is recommended. Any obligatory training for operating and service personnel
must be carried out and documented.
•
Follow all instructions marked on the product, including both general instructions and
the stated methods for avoiding hazards.
•
The system must not be operated unless safety is guaranteed. Any faults and errors
that might affect safety must be reported immediately by the user to a person in
responsibility.
•
The system must only be operated under the environmental conditions and with the
connections, described in the documentation.
•
Modifications to any part of the system (including software) must be carried out by
Alcatel-Lucent or by trained and qualified personnel authorized by Alcatel-Lucent.
Unauthorized modifications will lead to a complete exemption from liability. Only
components recommended by the manufacturer and listed in the procurement
documents should be used.
•
The use of non-system software is not recommended. The use/installation of
non-system software can adversely affect the normal functioning of the system.
•
Only use tested and virus-free data carriers (for example, floppy disks and streamer
tapes).
•
The removal or disabling of safety facilities, fault clearance, and maintenance of
equipment must be carried out by trained and qualified personnel only and in
conjunction with the respective documentation. Only approved measuring and test
equipment must be used.
Safety and general information
Basic safety aspects
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9962 MSEC v1.0
3MN-02001-0002-RJZZA
Issue 2.01
September 2015
1-7
P
RELIMINARY
P
RELIMINARY
