Alcatel-Lucent 7750 SR-a4, Руководство по установке, Страница: 131 / 232

Powering Up, Initializing, and Configuring
7750 SR-a4 and SR-a8 Installation Guide 131
Configuring Parameters
After the CPM is installed, chassis slots, IOM-a and MDA-a cards can be configured before
or after the components are installed.
Each specific slot must specify an IOM-a, MDA-a slot, and MDA-a type. You cannot
configure ports until the MDA-a is configured.
Configure components in the following order:
1. Card slot number (use the
card
command)
2. Card type (use the
card-type
command)
3. MDA-a slot number (use the
mda
command)
4. MDA-a type (use the
mda-type
command)
5. Ports
Configuring Chassis Slot and IOM-a Parameters
In the
config
context, use the following CLI commands and syntax examples to provision
the chassis slot and IOM-a:
Configuring MDA-a Parameters
MDA-a cards must be configured before their ports can be configured.
Note:
• IOM-a cards are configured using the
card
and
card-type
commands (items 1 and
2 in the following list).
• MDA-a cards are configured using the
mda
and
mda-type
commands (items 3 and 4
in the following list).
Command Syntax Example
Step 1. card slot-number card 1
Step 2. card-type card-type card-type iom-a