Alcatel-Lucent 7450 ESS-1, Руководство по установке

Страница: 18 / 92

Chassis Features
Page 18 7450 ESS-1
DCE Flip the switch to DCE when connecting to the serial port of a PC with a
straight-through cable. When the switch is flipped to DCE, the console
port is acting as a data communications equipment (DCE) serial port.
5 Alarm The Alarm port is provisioned as a DB-9 serial port and is used to con-
nect to external alarm devices that report conditions that trigger red or
amber alarms.
6 ACO/LT The Audible Alarm Cutoff/Lamp Test button verifies the operability of
LEDs. When pressed, the LEDs should temporarily illuminate. This but-
ton also turns off all external alarm relay control bits until the next new
alarm condition. The LEDs blink when the button is depressed.
7 Status
• Green: Operationally up and administratively up.
• Amber: Operationally down but administratively up.
• Amber (blinking): Qualified, but previously failed.
• Unlit: Not operational, shutdown, or administratively down.
Power Supply 1
• Green: Indicates that AC input power is present and operational.
• Amber: Indicates an error condition with the AC input power.
• Unlit: Indicates that the AC power supply is not installed or not
recognized.
2
• Green: Indicates that DC input power is present and operational.
• Amber: Indicates an error condition with the DC input power.
• Unlit: Indicates that the DC power supply is not installed or not
recognized.
Fan
• Green: Indicates that the fans are operational.
• Amber: Indicates a fan failure.
• Unlit: Indicates that the fans are not operational.
Compact Flash 1,2,3
• Green: Indicates that the flash card is operational and in a read or write
process.
Note: Do not physically remove or attempt to remove the flash card
when the LED is lit green.
• Amber (blinking): Error condition exists.
• Amber (solid): Indicates that the slot is in an operationally down mode.
This is the only mode to safely remove the flash card.
• Unlit: A flash card is not installed in the slot.
Alarms OT
• Red: An overtemperature condition exists.
If there are no OT conditions, this LED should remain off.
Crit • Red: Indicates that a critical condition exists, such as a power supply
overtemperature condition, a fan tray failure, or an AC or DC power
supply failure.
If there are no critical conditions, this LED should remain off.
Table 2: 7450 ESS-1 Front Panel and LED Descriptions (Continued)
Key Label/Part Sub
category
Description