Reception terminal
8AL90383ENAAed01
24 /26
Room status configuration
This feature is used to specify whether all rooms or only those taken can be switched manually or
automatically (at a programmed time) to 'not cleaned' status:
Rooms:
•
Select the programmed hotel key.
•
Status
•
Global
•
Rooms
(consecutive presses).
•
Validate.
This feature is used to specify which are the rooms concerned by the switch to the 'to clean' status (all
rooms or only rooms taken).
Manual or automatic switch:
This feature is used to specify if the rooms concerned (on the 'rooms' menu) switch automatically or
manually into 'not cleaned' status.
•
Select the programmed hotel key.
•
Status
•
Global
o
Now:
manual switch.
o
Time
: automatic switch.
▪
Clear:
to delete the value.
In the table below, you can see the codes you have assigned to different problems indicated in room
status:
ROOM STATUS
YOUR CODE
Forward internal and outside calls
88
Room cleaned
0
Room not cleaned
1
Problem of:
Problem of:
Problem of:
Problem of:
Problem of:
Problem of:
Problem of:
Problem of:
Cancelling the problem
000
