Reception terminal
8AL90383ENAAed01
16 /26
Personal code
This feature is used to modify the password assigned to a client:
•
Select the programmed hotel key.
•
Select the key corresponding to the room or enter the number of the room.
•
Password
•
Choice
(consecutive presses): choose a password.
•
Validate.
•
System assigns another password.
The client can use his password to:
- Lock his terminal (prohibit external calls).
- Establish communications with protected account codes (using substitution or not).
- Access his voice mail box remotely.
Room to room barring
The 'room to room barring' feature is supported from OXO Connect R3.2.
This feature is used to allow calls between hotel rooms that are part of the same group and restrict calls
between hotel rooms that are part of different groups.
To create a group of rooms, you have to define the same group name for each room in this group.
At check-in, the default group name (empty) is set for the room. Depending on the configuration, calls
are allowed (default group inactive) or barred (default group activated) between all rooms in default
group. The status of the default group is defined by your administrator or via the customization functions
(see chapter: Customising your application).
To add the room to a group or to create a new group:
•
Select the programmed hotel key.
•
Select the key corresponding to the room or enter the number of the room.
•
Group
•
Group Name (maximum characters 8).
If the group name exists, the room is added to the group and this room will be allowed to call the
other rooms of this group. Otherwise, the room will be the first or the only room of the new group
(one removed).
•
Validate.
•
Clear
: to delete the group name.
Information about the phone model
•
Select the programmed hotel key.
•
Select the key corresponding to the room or enter the number of the room.
•
terminal
The model of the phone is displayed.
