Alcad DM-102, Техническая записка

Страница: 12 / 18

12
Please note the following screenshot and settings:
ACTIVE- To enable the input to be active the option must be set to “ON”. If you do not want
the input to be seen or is not going to be used set to “OFF”.
Press transmit button on the programmer to send the change through to module.
SERVICE ID – This number needs to be unique and never repeated with any other modulator
on the same network. Thus on the next modulator service ID must be 3 and 4 and so on
Press transmit button on the programmer to send the change through to module.
SERVICE NAME – Enter the Service Name which will be displayed on the Television Screen when the
user goes to this channel on the TV set. This is like GEM, ONE, GO which the general broadcasters
use.
Press transmit button on the programmer to send the change through to module.
AV Input 2
AV Input 1