QUICK PROGRAMMING GUIDE 912-TP QPSK TO PAL
ENG
Start/on
912-TQ Transmodulator DVB-S/S2 to DVB-C
912-TP Transmodulator QPSK-PAL
Select series
Confi gure module
912-TP Transmodulator QPSK-PAL
Transcodifi cador 912 QPSK - COFDM
NIT Table
Select series
Main menu
Press the Power On key of the PS-011 to start up the
system.
Set the programming switch of the 912-TP module to the ON position. The programming
indicator will now light up and remain lit.
Choose
Select Series
to select the programming series.
Select the series:
912-TP Transmodulator QPSK -PAL.
To commence programming the module, select
Confi gure
module
.
OK
OK
OK
1952
Input frequency
MHz
Use the numeric keypad to enter the IF frequency of the
transponder. Then press T to transmit.
T
T
Input
Using the numeric keypad, enter the symbol rate of
the transponder. Then press T to transmit.
Select the error correction rate (FEC QPSK) of the
transponder. By default it is set to Auto. Then press
T to transmit.
OK+
TS
+OK+T
FEC QPSK
Auto
Frequency
471.25
MHz
If you are programming the output by frequency, enter
the frequency using the numeric keypad. Then press T
to transmit.
T
Program by
Channel
Channel
Frequency
OSD Language
English
Channel
21
Select the programming mode of the output of the
module: channel or frequency.
Select the language of the OSD. Then press T to
transmit.
If you are programming the output by channel, you
can either enter the channel using the numeric keypad
or select a channel from the pulldown list. Confi rm you
choice with OK, then press T to transmit.
OK+
TS
+OK
OK+
TS
+OK+T
T
OK+
TS
+OK+T
or
Output
Standard
BG/ stereo
Select the standard for the output channel. Then press
T to transmit.
OK+
TS
+OK+T
Symbol rate QPSK
1000
KBd
