ALC AWS337, Руководство пользователя

Страница: 98 / 104

— 96 —
TROUBLESHOOTING
Problem
No Image.
Poor picture quality.
The motion sensor
does not respond to
movement.
Standard or Scheduled
recording is not working
properly.
Unable to pair the camera
to the monitor.
A white image appears at
night.
Possible Solution
Make sure the camera’s power is on.
Connect it to the included adapter.
Move the camera closer to the monitor; it might be out of
range or flip the antenna of the monitor and/or camera to
obtain best possible reception.
If the monitor is connected to a PC, no image will appear.
Move the camera closer to the monitor; it might be out of
range or flip the antenna of the monitor and/or camera to
obtain best possible reception.
Clean the camera lens using a microfiber cloth.
Ensure the camera is set to motion in the schedule
section, see page 27
Increase or decrease the sensitivity of the motion sensor
(for details see page 28).
Part of the screen is set to mask, see page 27.
Ensure the correct Date and Time have been set, for
details see page 34.
Ensure the Record Schedule has been setup correctly,
see page 27 for more details.
Ensure the micro SD card is inserted into the monitor
and formatted.
Make sure the camera’s power is on.
Press and hold the pairing button for 5 seconds. Do not
press and release it; see page 22.
Turn off the monitor and restart. If power button does not
respond, use a pin to press the Reset button located on
the side of the monitor.
The camera’s infrared LEDs shine invisible light that
reflects off surfaces such as glass will cause white light.
Place the camera on the other side of the window to
improve the night vision or place it in a well-lit area (it
is recommended to install a security lamp to improve
lighting).
If you have any trouble with your system, try these simple steps which should handle most
common issues.