Albrecht DB 275, Руководство пользователя

Страница: 80 / 184

4.7 Cloning a ready programmed radio (
Master
) via wired connection to a another radio
(
Slave
)
Please note that you will need a special optional available cloning cable!
a) Switch the
Master
radio on while pressing
PTT
and
MONI
buttons together..
ζowΝδστΝshowsΝ“Ν
CLONE READY
”Νέέ
b) Connect the
Master
with the
Slave
radio by transfer cable and turn on the power of the
Slave
radio
c) Press MONI on the
Master
radio. At the
Master
, the LED begins to flash red and at
the
Slave
radio green.
d) After about 30 seconds cloning is completed.
Master
radio turns back into
“Ν
Ready
cloning
”Ν
and is able to clone the another or more
Slave
radio(s) if needed).
e) The
Slave
radio shows
CLONE
and resets automatically to normal operation.
In case of an error during cloning the radio will show
CLONE ERROR
. Please check the cable
connections and repeat the procedure.

If you need to clone more than only 1 radio, please turn off the cloned radio (the
Slave
)

Take off the cable from the
Slave
radio and connect the next
Slave
radio

Repeat the steps c) ..d)

To quit the procedure, turn the radio off and on again