English 109
You can also store these temporary frequencies into channel storage
banks when you receive them in
Scan
mode and scroll to them in
Scan
Hold
mode. See also Storing Found Search Frequencies on page 102.
Close Call Delay
This setting controls how long the scanner stays on the frequency after a
transmission ends before resuming Close Call operation. If you select a
minus delay time, the scanner stops on the transmission for the preset
time and then automatically resumes searching. (Default = 2
seconds).This setting affects both Search and Close Call.
1. Press
Func
then
Hold
to view the
Close Call
menu.
2. Scroll to
Set Delay
and press
Pgm/E
.
3. Scroll to select the delay time from following options:
• -10 sec - resumes after 10 seconds.
• - 5 sec - resumes after 5 seconds.
• 0 sec - resumes immediately.
• 1 sec - waits 1 second for a reply then resumes.
• 2 sec - waits 2 seconds for a reply then resumes.
• 3 sec - waits 3 seconds for a reply then resumes.
• 4 sec - waits 4 seconds for a reply then resumes.
• 5 sec - waits 5 seconds for a reply then resumes.
4. Press
Pgm/E
to save and return to the
Close Call
menu.
Close Call CTCSS/DCS Search
This setting controls whether the scanner will search for a subaudible
tone when it stops on a transmission during Close Call operation.
(Default = On).This setting affects both Search and Close Call.
3.
Press
Func
then
Hold
to view the
Close Call
menu.
4.
Scroll to
CTCSS/DCS Search
and press
Pgm/E
.
5.
Scroll to select one of the following options:
• Search Off
• Search On
5.
Press
Pgm/E
to save and return to the
Close Call
menu.
Содержание 4032661271259
Страница 1: ...AE75H AE125H Scanning Receiver Deutsch English Fran ais...
Страница 61: ...AE75H AE125H Scanning Receiver English...
Страница 117: ...AE75H AE125H R cepteur balayage Fran ais...
Страница 176: ...Printed in Vietnam U01UB374AZA 0...