100 English
To start a Quick Search at the current frequency during Close Call
Search, turn
SCROLL CONTROL
in Hold mode and press
Hold
to start
searching.
When the scanner finds a transmission, it stops on it. When the
transmission ends, the scanner resumes searching according to the
delay setting.
While searching in
Quick Search
mode, the upper line displays Quick
Search and the lower line displays the searching frequency and the
direction indicator (↑or ↓) with the modulation.
If you want to change the search direction or if it is a long transmission
and you want to continue searching, turn
SCROLL CONTROL
or press
Srch/Svc
.
Quick Search Receive/Hold Modes
To hold on a frequency press
Hold
. To step through the frequencies,
turn
SCROLL CONTROL
in
Hold
mode. Press
Hold
to resume.
While monitoring a transmission, the upper line displays Quick Search
and the lower line displays the current frequency and the direction
indicator (↑or ↓).
The modulation,
Priority
mode icon (if Priority is enabled), any
CTCSS/DCS received (if enabled), and the Close Call icon (if CC Pri or
CC-DND is enabled) will also appear in the display.
• To store a frequency, press
Pgm/E
• To temporarily lock out a frequency, press
L/O
.
• To permanently lock out a frequency, press
L/O
twice quickly.
• To exit Quick Search, press
Scan
.
See also Search Options on page 100 for Delay, CTCSS/DCS settings,
and locking out/reviewing/unlocking frequencies.
Search Options
Search Delay
This setting controls how many seconds the scanner waits after a
transmission ends before resuming searching. If you select a minus
delay time, the scanner stops on the transmission for the setting time
Содержание 4032661271259
Страница 1: ...AE75H AE125H Scanning Receiver Deutsch English Fran ais...
Страница 61: ...AE75H AE125H Scanning Receiver English...
Страница 117: ...AE75H AE125H R cepteur balayage Fran ais...
Страница 176: ...Printed in Vietnam U01UB374AZA 0...